SIUPA | What should I do if the double -layer glass has water vapor? There are wonderful tricks here!

The SIUPA Aluminum alloy Doors and Window factory believes:

Window is a particularly important part of the decoration. It can not only play a role in decoration, but also the problem of residence in the future, so you must not despise the problem of doors and windows. Many people find that after using doors and windows for a period of time, they find that there is water vapor between double -layer glass, which seriously affects sight and aesthetics. So what should I do at this time?

If water vapor appears in the double -layer glass at home, we must first figure out what the reason for the water vapor is. It is easy to solve the problem. In general, there are three reasons for this:

1. Drainage holes and air pressure balance holes are not opened. Usually, water vapor will be evaporated on the water vapor after rain.

2. The installation of the section of the doors and windows is unreasonable. Generally, it is necessary to leave a certain space when paste the middle barrier. If the location is not reserved, the rainwater will be in contact with the mid -range strip when it rains. Water vapor will appear;

3. Another reason is that the glass is not sealed, and the surrounding sealing glue is uneven.

Clarify the reasons for the water vapor of double glass. The top ten brands of the doors and windows of the doors and windows will teach you a few tricks to allow everyone to easily solve the water and gas problem of the door and window glass:

If it is found that the drainage hole and the air pressure balance hole are not opened during the examination, the treatment method is relatively simple, just open it;

2. If the septum bar is not installed well, you can add some glass pads under the interval bar to directly avoid contact with the rainwater, so that the glass will not have water vapor;

3. Ensure the sealing of doors and windows, change the molecular sieve of doors and windows or re -apply a layer of sealing glue;

4. Apply a layer of glass glue on the outside of the interval to avoid contacting the rainwater directly;

5. There is also the simplest and most rude way to change the doors and windows directly.